Shenzhen Wofly Technology Co., Ltd.
Shenzhen Wofly Technology Co., Ltd.
Add to Cart
1)Max inlet pressure: 500, 3000 psi
2)Outlet pressure: 0~25, 0~50, 0~100, 0~250, 0~500 psi
3)Proof pressure: 1.5 times of maximum rated pressure
4)Working temperature: -40°F-+165°F(-40°C-+74°C)
5)Leakage rate: 2*10-8 atm cc/sec He
6)Cv: 0.08
1) Single -stage reduce Structure.
2) Use hard-seal between body and diaphragm
3) Body Thread : 1/4“ NPT ( F )
4) Easy to sweep inside body
5) Filter mesh inside
6) Panel mountable or wall mounted
Typical applications
1) Laboratory
2) Gas Chromatograph
3) Gas Laser
4) Gas bus
5) Oil and chemical industry
6) Tested instrumentation
ORDERING INFORMATION
| R11 | L | B | D | F | G | 00 | 00 | P |
| Item | Body Materia | Body Hole | Inlet pressure | Outlet pressure | Pressure gauge | Inlet size | Outlet size | mark |
| R11 | L:316 | A | D:3000 psi | F:0-500 psi | G:MPa gauge | 00:1/4 " NPT (F) | 00: 1/4 " NPT(F) | P:Panel mounting |
| B:Brass | B | E:2200 psi | G:0-250 psi | 01:1/4 " NPT (M) | 01: 1/4 " NPT(M) | N:Needle valve | ||
| D | F:500 psi | l:0-100 psi | P:Psig/bar gauge | 23: CGA330 | 10:1/8 " OD | N:Needle valve | ||
| G | K:0-50 psi | 24: CGA350 | 11:1/4 " OD | D:Diaphragm valve | ||||
| J | L:0-25 psi | W:No gauge | 28: CGA660 | 12:3/8 " OD | ||||
| M | 28: CGA660 | 15:6mm OD | ||||||
| 30: CGA590 | 16:8mm OD | |||||||
| 52: G5/8 "-RH(F) | ||||||||
| 63: W21.8-14H(F) | ||||||||
| 64: W21.8-14LH(F) |
Q. Are you manufacturer?
A. Yes, we are manufacturer.
Q.What is lead time?
A.3-5days. 7-10 days for 100pcs
Q. How do I order?
A.You can order it from Alibaba directly or send us a inquiry. We will reply you within 24 hours
Q. Do you have any certificates?
A. We have CE certificate.
Q. What materials do you have?
A. aluminium alloy and chrome plated brass are available. The picture shown is chrome plated brass. If you need other material, pls contact us.
Q. What is maximum inlet pressure?
A.3000psi (about 206bar)
Q. How do I confirm inlet connnection for cylidner?
A. Pls check cylinder type and confirm it. Normally, it is CGA5/8 male for Chinese cylinder. Other cylidner adapter are also
available e.g CGA540, CGA870 etc.