
Add to Cart
Specification | ||
1 | max. inlet pressure | 500,3000psi |
2 | outlet pressure | 0~25,0~50,0~100,0~250,0~500psig |
3 | proof pressure | 1.5times of maximum rated pressure |
4 | working tem | -40℉~+446℉(-40℃~+230℃) |
5 | leakage rate | 2*10-8 atm cc/sec He |
6 | Cv | 0.08 |
Material | ||
1 | Body | 316L,Brass |
2 | Roof | 316L,Brass |
3 | Diaphragm | 316L |
4 | Filter mesh | 316L(10μm) |
5 | Valve seat | PCTFE,PTFE,Vespel |
6 | Spring loaded | 316L |
7 | Valve disc regulation pole | 316L |
![]() | Typical Applications |
Laboratory | |
Gas chromeatograph | |
Gas laser | |
Gas bus | |
Oil and chemical industry | |
Tested instrumentation |
R11 Series stainless steel pressure regulator steel pressure regulator is Single-stage diaphragms, vacuum structure Stainless diaphragms output. It has piston pressure reducing structure, constant outlet pressure, mainly used for high input pressure, suitable for purified gas, standard gas, corrosive etc.
Design Features | |
1 | Single-stage reduce structure |
2 | Use hard-seal between body and diaphragm |
3 | Body thread:1/4"NPT (F) |
4 | Easy to sweep inside body |
5 | Filter mesh inside |
6 | Panel mountable or wall mounted |
Ordering Information
R11 | L | B | B | D | G | 00 | 02 | P |
Item | Body Material | Body Hole | Inlet Pressure | Outlet Pressure | Pressure Guage | Inlet size | Outlet size | Mark |
R11 | L:316 | A | D:3000 psi | F:0-500psig | G:Mpa guage | 00:1/4″NPT(F) | 00:1/4″NPT(F) | P:Panel mounting |
B:Brass | B | E:2200 psi | G:0-250psig | P:Psig/Bar Guage | 01:1/4″NPT(M) | 01:1/4″NPT(M) | R:With relief valve | |
D | F:500 psi | K:0-50pisg | W:No guage | 23:CGGA330 | 10:1/8″ OD | N:Needle calve | ||
G | L:0-25psig | 24:CGGA350 | 11:1/4″ OD | D:Diaphregm valve | ||||
J | 27:CGGA580 | 12:3/8″ OD | ||||||
M | 28:CGGA660 | 15:6mm OD | ||||||
30:CGGA590 | 16:8mm OD | |||||||
52:G5/8″-RH(F) | ||||||||
63:W21.8-14H(F) | ||||||||
64:W21.8-14LH(F) |