Shenzhen Wofly Technology Co., Ltd.
Shenzhen Wofly Technology Co., Ltd.
Add to Cart
R31 series stainless steel pressure,double-stage diaphragm pressure reducing construction,stable output pressure,applied to high pure gas,corrosive gas and so on.
| Material List of Gas Pressure Regulator | ||
| 1 | Body | 316L,Brass |
| 2 | Roof | 316L,Brass |
| 3 | Diaphragm | 316L |
| 4 | Filter mesh | 316L(10μm) |
| 5 | Valve seat | PCTFE,PTFE,Vaspel |
| 6 | Spring loaded | 316L |
| 7 | Valve disc regulation pole | 316L |
| Typical Application of R31 Stainless Steel Pressure Regulator | ||
| 1 | Laboratory | |
| 2 | Gas chromatograph | |
| 3 | Gas laser | |
| 4 | Gas bus-bar | |
| 5 | Petrochemical industry | |
| 6 | Tested instrumentation | |
| Main Features of High Pressure Argon Gas Pressure Regulator | ||
| 1 | Five hole design of the body | |
| 2 | Double-stage reduce body and diaphragm | |
| 3 | Ues hard-seal between body and diaphragm | |
| 4 | Body thread:input and output connection 1/4"NPT F | |
| 5 | Easy to sweep inside body | |
| 6 | Filter element installed internally | |
| 7 | Panel mountable or wall mounting available | |
| 8 | Optional outlet:needle valve,diaphragm valve | |
ORDERING INFORMATION
| R31 | L | B | G | G | 00 | 00 | 02 | P |
| Item | Body Material | Body Hole | Inlet Pressure | Outlet Pressure | Pressure Guage | Inlet size | Outlet size | Mark |
| R31 | L:316 | M | G:3000 psi | G:0-250psig | G:Mpa guage | 00:1/4 “NPT(F) | 00:1/4 “NPT(F) | P:Panel mounting |
| B:Brass | Q | F:500 psi | I:0-100psig | P:Psig/Bar Guage | 00:1/4 “NPT(F) | 00:1/4 “NPT(F) | R:With relief valve | |
| k:0-50psig | W:No guage | 23:CGA330 | 10:1/8″ OD | N:With Needle valve | ||||
| L:0-25psig | 24:CGA350 | 11:1/4″ OD | D:With diaphragm valve | |||||
| Q:30″Hg Vac-30psig | 27:CGA580 | 12:3/8″ OD | ||||||
| S:30″Hg Vac-60psig | 28:CGA660 | 15:6mm OD | ||||||
| T:30″Hg Vac-100psig | 30:CGA590 | 16:8mm OD | ||||||
| U:30″Hg Vac-200psig | 52:G5/8-RH(F) | 74:M8X1-RH(M) | ||||||
| 63:W21.8-14(F) | ||||||||
| 64:W21.8-14LF(F) |